dmesg - Seagate ST31000528AS
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.7.0-7-generic (buildd@meitnerium) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #15-Ubuntu SMP Sat Dec 15 16:34:25 UTC 2012 (Ubuntu 3.7.0-7.15-generic 3.7.0)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] reserved
BIOS-e820: [mem 0x0000000000090000-0x00000000000913ff] usable
BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf49cfff] usable
BIOS-e820: [mem 0x00000000bf49d000-0x00000000bf4befff] reserved
BIOS-e820: [mem 0x00000000bf4bf000-0x00000000bf64efff] usable
BIOS-e820: [mem 0x00000000bf64f000-0x00000000bf7befff] ACPI NVS
BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf7dafff] usable
BIOS-e820: [mem 0x00000000bf7db000-0x00000000bf7fefff] ACPI data
BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fcffffff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
NX (Execute Disable) protection: active
DMI 2.5 present.
DMI: /DX58SO, BIOS SOX5810J.86A.5599.2012.0529.2218 05/29/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 100000000 mask F80000000 write-back
3 base 180000000 mask FC0000000 write-back
4 base 0FFE00000 mask FFFE00000 write-protect
5 base 0FFE00000 mask FFFFF0000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000089000] 89000 size 24576
init_memory_mapping: [mem 0x00000000-0xbf7fffff]
[mem 0x00000000-0xbf7fffff] page 2M
kernel direct mapping tables up to 0xbf7fffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x1bfffffff]
[mem 0x100000000-0x1bfffffff] page 2M
kernel direct mapping tables up to 0x1bfffffff @ [mem 0xbf7d7000-0xbf7dafff]
RAMDISK: [mem 0x3615e000-0x370a6fff]
ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
ACPI: XSDT 00000000bf7fe120 00074 (v01 INTEL DX58SO 000015DF 01000013)
ACPI: FACP 00000000bf7fd000 000F4 (v03 INTEL DX58SO 000015DF MSFT 0100000D)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000450/0x0 (20120913/tbfadt-598)
ACPI BIOS Bug: Warning: Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20120913/tbfadt-648)
ACPI: DSDT 00000000bf7f8000 04622 (v02 INTEL DX58SO 000015DF MSFT 0100000D)
ACPI: FACS 00000000bf726000 00040
ACPI: APIC 00000000bf7f7000 00138 (v02 INTEL DX58SO 000015DF MSFT 0100000D)
ACPI: WDDT 00000000bf7f6000 00040 (v01 INTEL DX58SO 000015DF MSFT 0100000D)
ACPI: MCFG 00000000bf7f5000 0003C (v01 INTEL DX58SO 000015DF MSFT 0100000D)
ACPI: ASF! 00000000bf7f4000 000AC (v32 INTEL DX58SO 000015DF MSFT 0100000D)
ACPI: HPET 00000000bf7f3000 00038 (v01 INTEL DX58SO 000015DF MSFT 0100000D)
ACPI: WDTx 00000000bf7f1000 0020C (v02 INTEL DX58SO 000015DF MSFT 0100000D)
ACPI: SSDT 00000000bf7de000 12A04 (v01 INTEL SSDT PM 000015DF MSFT 0100000D)
ACPI: DMAR 00000000bf7db000 00168 (v01 INTEL DX58SO 000015DF MSFT 0100000D)
ACPI: ASPT 00000000bf7f2000 00034 (v04 INTEL PerfTune 000015DF MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001bfffffff]
Initmem setup node 0 [mem 0x00000000-0x1bfffffff]
NODE_DATA [mem 0x1bfffc000-0x1bfffffff]
[ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801b9600000-ffff8801bf5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x1bfffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0008efff]
node 0: [mem 0x00090000-0x00090fff]
node 0: [mem 0x00100000-0xbf49cfff]
node 0: [mem 0xbf4bf000-0xbf64efff]
node 0: [mem 0xbf7bf000-0xbf7dafff]
node 0: [mem 0xbf7ff000-0xbf7fffff]
node 0: [mem 0x100000000-0x1bfffffff]
On node 0 totalpages: 1570250
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3898 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 763530 pages, LIFO batch:31
Normal zone: 12288 pages used for memmap
Normal zone: 774144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000008f000 - 0000000000090000
PM: Registered nosave memory: 0000000000091000 - 0000000000092000
PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf49d000 - 00000000bf4bf000
PM: Registered nosave memory: 00000000bf64f000 - 00000000bf7bf000
PM: Registered nosave memory: 00000000bf7db000 - 00000000bf7ff000
PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fd000000
PM: Registered nosave memory: 00000000fd000000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8801bfc00000 s84736 r8192 d21760 u131072
pcpu-alloc: s84736 r8192 d21760 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1541572
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 6083244k/7340032k available (6900k kernel code, 1059032k absent, 197756k reserved, 6312k data, 984k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
NR_IRQS:16640 nr_irqs:808 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 25165824 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3442.305 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6884.61 BogoMIPS (lpj=13769220)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20120913
ftrace: allocating 25955 entries in 102 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fe710000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fe710000 ver 1:0 cap c90780106f0462 ecap f0207a
dmar: RMRR base: 0x000000bf4aa000 end: 0x000000bf4aafff
dmar: RMRR base: 0x000000bf4ae000 end: 0x000000bf4aefff
dmar: RMRR base: 0x000000bf4af000 end: 0x000000bf4affff
dmar: RMRR base: 0x000000bf4a2000 end: 0x000000bf4a2fff
dmar: RMRR base: 0x000000bf4a5000 end: 0x000000bf4a5fff
dmar: RMRR base: 0x000000bf4a7000 end: 0x000000bf4a7fff
dmar: RMRR base: 0x000000bf4a8000 end: 0x000000bf4a8fff
dmar: RMRR base: 0x000000bf4a1000 end: 0x000000bf4a1fff
dmar: RMRR base: 0x000000000ec000 end: 0x000000000eefff
IOAPIC id 8 under DRHD base 0xfe710000 IOMMU 0
Enabled IRQ remapping in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
Brought up 8 CPUs
smpboot: Total of 8 processors activated (55076.88 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbf64f000-0xbf7befff] (1507328 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3d])
pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000cbfff] (conflicts with Video ROM [mem 0x000c0000-0x000c7fff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3d]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfedfffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:19.0: [8086:10cc] type 00 class 0x020000
pci 0000:00:19.0: reg 10: [mem 0xc3300000-0xc331ffff]
pci 0000:00:19.0: reg 14: [mem 0xc3323000-0xc3323fff]
pci 0000:00:19.0: reg 18: [io 0x4100-0x411f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0x40e0-0x40ff]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0x40c0-0x40df]
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io 0x40a0-0x40bf]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xc3322000-0xc33223ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0x4080-0x409f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xc3321000-0xc33213ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 10: [io 0x4128-0x412f]
pci 0000:00:1f.2: reg 14: [io 0x4134-0x4137]
pci 0000:00:1f.2: reg 18: [io 0x4120-0x4127]
pci 0000:00:1f.2: reg 1c: [io 0x4130-0x4133]
pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f]
pci 0000:00:1f.2: reg 24: [mem 0xc3320000-0xc33207ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf2000000-0xf20000ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10de:1081] type 00 class 0x030000
pci 0000:02:00.0: reg 10: [mem 0xc2000000-0xc2ffffff]
pci 0000:02:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:02:00.0: reg 24: [io 0x3000-0x307f]
pci 0000:02:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
pci 0000:02:00.1: [10de:0e09] type 00 class 0x040300
pci 0000:02:00.1: reg 10: [mem 0xc3000000-0xc3003fff]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:03.0: bridge window [mem 0xc2000000-0xc30fffff]
pci 0000:00:03.0: bridge window [mem 0xd8000000-0xe1ffffff 64bit pref]
pci 0000:03:00.0: [10de:1086] type 00 class 0x030000
pci 0000:03:00.0: reg 10: [mem 0xc0000000-0xc0ffffff]
pci 0000:03:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:03:00.0: reg 24: [io 0x2000-0x207f]
pci 0000:03:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
pci 0000:03:00.1: [10de:0e09] type 00 class 0x040300
pci 0000:03:00.1: reg 10: [mem 0xc1000000-0xc1003fff]
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:07.0: bridge window [mem 0xc0000000-0xc10fffff]
pci 0000:00:07.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.1: PCI bridge to [bus 05]
pci 0000:06:00.0: [11ab:6121] type 00 class 0x01018f
pci 0000:06:00.0: reg 10: [io 0x1018-0x101f]
pci 0000:06:00.0: reg 14: [io 0x1024-0x1027]
pci 0000:06:00.0: reg 18: [io 0x1010-0x1017]
pci 0000:06:00.0: reg 1c: [io 0x1020-0x1023]
pci 0000:06:00.0: reg 20: [io 0x1000-0x100f]
pci 0000:06:00.0: reg 24: [mem 0xc3200000-0xc32003ff]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.4: bridge window [mem 0xc3200000-0xc32fffff]
pci 0000:07:03.0: [104c:8023] type 00 class 0x0c0010
pci 0000:07:03.0: reg 10: [mem 0xc3104000-0xc31047ff]
pci 0000:07:03.0: reg 14: [mem 0xc3100000-0xc3103fff]
pci 0000:07:03.0: supports D1 D2
pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc3100000-0xc31fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfedfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xf7ffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf49d000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf64f000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf7db000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3d]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c4000-0x000cbfff window]
pnp 00:00: [mem 0xfed40000-0xfedfffff window]
pnp 00:00: [mem 0xc0000000-0xf7ffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x000f]
pnp 00:01: [io 0x0081-0x0083]
pnp 00:01: [io 0x0087]
pnp 00:01: [io 0x0089-0x008b]
pnp 00:01: [io 0x008f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x0070-0x0071]
pnp 00:02: [io 0x0074-0x0077]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io 0x00f0]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x0500-0x053f]
pnp 00:05: [io 0x0400-0x047f]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x0680-0x06ff]
pnp 00:05: [io 0x0010-0x001f]
pnp 00:05: [io 0x0072-0x0073]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0084-0x0086]
pnp 00:05: [io 0x0088]
pnp 00:05: [io 0x008c-0x008e]
pnp 00:05: [io 0x0090-0x009f]
system 00:05: [io 0x0500-0x053f] has been reserved
system 00:05: [io 0x0400-0x047f] has been reserved
system 00:05: [io 0x0680-0x06ff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [mem 0xfec00000-0xfec000ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:08: [mem 0xfed00000-0xfed03fff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:02:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:03:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc1100000-0xc12fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc1300000-0xc14fffff 64bit pref]
pci 0000:00:1c.1: BAR 14: assigned [mem 0xc1500000-0xc16fffff]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xc1700000-0xc18fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xc1900000-0xc1afffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: BAR 6: assigned [mem 0xc3080000-0xc30fffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:03.0: bridge window [mem 0xc2000000-0xc30fffff]
pci 0000:00:03.0: bridge window [mem 0xd8000000-0xe1ffffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xc1080000-0xc10fffff pref]
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:07.0: bridge window [mem 0xc0000000-0xc10fffff]
pci 0000:00:07.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xc1100000-0xc12fffff]
pci 0000:00:1c.0: bridge window [mem 0xc1300000-0xc14fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 05]
pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.1: bridge window [mem 0xc1500000-0xc16fffff]
pci 0000:00:1c.1: bridge window [mem 0xc1700000-0xc18fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.4: bridge window [mem 0xc3200000-0xc32fffff]
pci 0000:00:1c.4: bridge window [mem 0xc1900000-0xc1afffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci 0000:00:1e.0: bridge window [mem 0xc3100000-0xc31fffff]
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1c.1: enabling device (0000 -> 0003)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xfed40000-0xfedfffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xf7ffffff]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xc2000000-0xc30fffff]
pci_bus 0000:02: resource 2 [mem 0xd8000000-0xe1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc10fffff]
pci_bus 0000:03: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:04: resource 1 [mem 0xc1100000-0xc12fffff]
pci_bus 0000:04: resource 2 [mem 0xc1300000-0xc14fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:05: resource 1 [mem 0xc1500000-0xc16fffff]
pci_bus 0000:05: resource 2 [mem 0xc1700000-0xc18fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0xc3200000-0xc32fffff]
pci_bus 0000:06: resource 2 [mem 0xc1900000-0xc1afffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xc3100000-0xc31fffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0xfed40000-0xfedfffff]
pci_bus 0000:07: resource 8 [mem 0xc0000000-0xf7ffffff]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15652k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb49d000-0xbf49cfff] (64MB) mapped at [ffff8800bb49d000-ffff8800bf49cfff]
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1357632546.548:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 11911
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pcieport 0000:00:03.0: irq 42 for MSI/MSI-X
pcieport 0000:00:07.0: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 46 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc3320000 port 0xc3320100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xc3320000 port 0xc3320180 irq 47
ata3: SATA max UDMA/133 abar m2048@0xc3320000 port 0xc3320200 irq 47
ata4: SATA max UDMA/133 abar m2048@0xc3320000 port 0xc3320280 irq 47
ata5: SATA max UDMA/133 abar m2048@0xc3320000 port 0xc3320300 irq 47
ata6: SATA max UDMA/133 abar m2048@0xc3320000 port 0xc3320380 irq 47
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xc3322000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.7.0-7-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc3321000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.7.0-7-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.7.0-7-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.7.0-7-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x000040a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.7.0-7-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.7.0-7-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.7.0-7-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.7.0-7-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: a37e8d8f17247a12bca04fac461c3b30422126d5'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:02: setting system clock to 2013-01-08 08:09:08 UTC (1357632548)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN00, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 10x/10x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
ata3.00: ATA-8: ST31000528AS, CC34, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: ATA-8: ST31000528AS, CC34, max UDMA/133
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: failed to get Identify Device Data, Emask 0x1
ata4.00: failed to get Identify Device Data, Emask 0x1
ata3.00: failed to get Identify Device Data, Emask 0x1
ata3.00: configured for UDMA/133
ata4.00: failed to get Identify Device Data, Emask 0x1
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: unknown partition table
sd 2:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2
sdb: p2 size 3395035136 extends beyond EOD, enabling native capacity
sdb: sdb1 sdb2
sdb: p2 size 3395035136 extends beyond EOD, truncated
sd 3:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 984k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1280k freed
Freeing unused kernel memory: 1148k freed
udevd[144]: starting version 175
Disabling lock debugging due to kernel taint
xor: automatically using best checksumming function:
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
scsi6 : pata_marvell
scsi7 : pata_marvell
ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 16
ata8: PATA max UDMA/133 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 16
generic_sse: 12980.000 MB/sec
bio: create slab at 1
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:a2:63:5e
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
device-mapper: dm-raid45: initialized v0.2594b
firewire_ohci 0000:07:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
tsc: Refined TSC clocksource calibration: 3442.330 MHz
Switching to clocksource tsc
usb 6-1: new full-speed USB device number 2 using uhci_hcd
usb 6-1: New USB device found, idVendor=045e, idProduct=028e
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: Product: Controller
usb 6-1: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
usb 6-1: SerialNumber: 14FBBE8
EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
EXT4-fs (dm-1): write access will be enabled during recovery
firewire_core 0000:07:03.0: created device fw0: GUID 0090270002463ac2, S400
usb 6-2: new full-speed USB device number 3 using uhci_hcd
usb 6-2: New USB device found, idVendor=045e, idProduct=0745
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v6.0
usb 6-2: Manufacturer: Microsoft
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v6.0 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input2
hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v6.0] on usb-0000:00:1d.0-2/input0
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v6.0 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input3
hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v6.0] on usb-0000:00:1d.0-2/input1
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v6.0 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/input/input4
hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v6.0] on usb-0000:00:1d.0-2/input2
EXT4-fs (dm-1): recovery complete
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[883]: starting version 175
lp: driver loaded but no devices found
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
wmi: Mapper loaded
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
gpio_ich: GPIO from 195 to 255 on gpio_ich
i2c i2c-0: Matched asc7621a at 0x2e
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x16
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Registered led device: xpad0
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input5
usbcore: registered new interface driver xpad
hda_intel: Disabling MSI
hda-intel: 0000:02:00.1: Handle VGA-switcheroo audio client
device-mapper: multipath: version 1.5.0 loaded
kvm: disabled by bios
kvm: disabled by bios
kvm: disabled by bios
ppdev: user-space parallel port driver
type=1400 audit(1357639755.201:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1205 comm="apparmor_parser"
type=1400 audit(1357639755.201:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1094 comm="apparmor_parser"
type=1400 audit(1357639755.201:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1205 comm="apparmor_parser"
type=1400 audit(1357639755.201:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1094 comm="apparmor_parser"
type=1400 audit(1357639755.201:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1205 comm="apparmor_parser"
type=1400 audit(1357639755.201:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1094 comm="apparmor_parser"
type=1400 audit(1357639755.217:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1229 comm="apparmor_parser"
type=1400 audit(1357639755.217:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1229 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: failsafe main process (1250) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card0/input6
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card0/input7
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card0/input8
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card0/input9
hda_intel: Disabling MSI
hda-intel: 0000:03:00.1: Handle VGA-switcheroo audio client
nvidia: module license 'NVIDIA' taints kernel.
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:02:00.0 to PCI:0000:03:00.0
type=1400 audit(1357639756.037:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1434 comm="apparmor_parser"
type=1400 audit(1357639756.037:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1434 comm="apparmor_parser"
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:07.0/0000:03:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:07.0/0000:03:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:07.0/0000:03:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:07.0/0000:03:00.1/sound/card1/input13
nvidia 0000:03:00.0: enabling device (0000 -> 0003)
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.09 Tue Dec 4 21:22:17 PST 2012
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Creating 8 devices ...
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Adding 381392k swap on /dev/zram0. Priority:100 extents:1 across:381392k SS
Adding 381392k swap on /dev/zram1. Priority:100 extents:1 across:381392k SS
Adding 381392k swap on /dev/zram2. Priority:100 extents:1 across:381392k SS
Adding 381392k swap on /dev/zram3. Priority:100 extents:1 across:381392k SS
Adding 381392k swap on /dev/zram4. Priority:100 extents:1 across:381392k SS
Adding 381392k swap on /dev/zram5. Priority:100 extents:1 across:381392k SS
Adding 381392k swap on /dev/zram6. Priority:100 extents:1 across:381392k SS
Adding 381392k swap on /dev/zram7. Priority:100 extents:1 across:381392k SS
init: udev-fallback-graphics main process (1794) terminated with status 1
init: gdm main process (1804) killed by TERM signal
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-stop pre-start process (2464) terminated with status 1
Netfilter messages via NETLINK v0.30.
[sched_delayed] sched: RT throttling activated